A preliminary approach of dynamic identification of slender buildings by neuronal networks

The study of the dynamic behavior of slender masonry structures is usually related to the preservation of the historic heritage. This study, for bell towers and industrial masonry chimneys, is particularly relevant in areas with an important seismic hazard. The analysis of the dynamic behavior of masonry structures is particularly complex due to the multiple effects that can affect the variation of its main frequencies along the seasons of the year: temperature and humidity. Moreover, these dynamic properties also vary considerably in structures built in areas where land subsidence due to the variation of the phreatic level along the year is particularly evident: the stiffness of the soil–structure interaction also varies. This paper presents a study to evaluate the possibility of detecting the variation of groundwater level based on the readings obtained using accelerometers in different positions on the structure. To do this a general case study was considered: a 3D numerical model of a bellower. The variation of the phreatic level was evaluated between 0 and −20 m, and 81 cases studies were developed modifying the rigidity of the soil–structure interaction associated to a position of the phreatic level. To simulate the dispositions of accelerometers on a real construction, 16 points of the numerical model were selected along the structure to obtain modal displacements in two orthogonal directions. Through an adjustment by using neural networks, a good correlation has been observed between the predicted position of the water table and acceleration readings obtained from the numerical model. It is possible to conclude that with a discrete register of accelerations on the tower it is possible to predict the water table depth.     

An evaluation method for measuring SPL and mode shape of tire cavity resonance by using multi-microphone system

This paper presents an evaluation method for measuring the sound pressure level and mode shapes of tire cavity resonance by using a multi-microphone system. Two commercial tires were evaluated to compare abilities of noise suppression by means of this method in the range of the first resonance from 200 to 260 Hz. One tire was a special tire that suppresses tire cavity resonance with polyurethane foam mounted on the tire’s inner liner. The other tire was a normal tire with no polyurethane foam. The mode shape change from vertical to horizontal direction in both tires. However, the sound pressure level of the special tire was lower than the normal tire at all frequencies.     

Low dose measurement with thick gate oxide MOSFETs

The low dose limit and the accuracy of high sensitivity MOS ionizing radiation dosimeters fabricated at LAAS-CNRS are investigated.     

堪为物理学第三分支的计算物理

本文是作者1982年在中国访问时所作的讲演,论述物理学各领域的前沿工作,用许多事例说明计算物理对推动物理理论的重大意义。文中还指出计算物理在其性质、方法及需要等方面不同于和独立于解析的理论物理和实验物理,而成为物理学的第三分支。     

低温/高温复合超导磁体的研究进展

低温/高温复合超导体的研究是当前超导领域比较新的一个课题,文章介绍了低温/高温复合超导体的结构以及加工工艺,并结合相关数值模拟和实验结果对复合超导体电流分布、热传导性质、理论机理和稳定性研究等相关问题进行了讨论与探索。     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.     

Film-forming characteristics and thermal stability of low viscosity benzoxazines derived from melamine

A novel class of low-viscosity benzoxazines has been synthesized from melamine and formaldehyde with phenol or bisphenol A. The striking feature of the class of benzoxazines is the subtle combination of their inherently low viscosity at room temperature, good film-forming characteristics and high chemical and thermal stability mainly due to the introduction of melamine into the network of the polymers. The structure of the benzoxazines has been confirmed by proton nuclear magnetic resonance spectroscopy and fourier transform infrared spectroscopy. Thermal properties of polybenzoxazine have been studied by differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis. Transparent polybenzoxazine films were easily obtained under solvent-free conditions, exhibiting significantly improved toughness compared to the conventional polybenzoxazines. Our research may open a new path for overcoming the present drawbacks of polybenzoxazines such as high brittleness, the difficulties in preparing films and poor processibility via tailoring the structures and properties of amine in the benzoxazines.     

Vacuum birefringence in strong magnetic fields: (I) Photon polarization tensor with all the Landau levels

Photons propagating in strong magnetic fields are subject to a phenomenon called the “vacuum birefringence” where refractive indices of two physical modes both deviate from unity and are different from each other. We compute the vacuum polarization tensor of a photon in a static and homogeneous magnetic field by utilizing Schwinger’s proper-time method, and obtain a series representation as a result of double integrals analytically performed with respect to proper-time variables. The outcome is expressed in terms of an infinite sum of known functions which is plausibly interpreted as summation over all the Landau levels of fermions. Each contribution from infinitely many Landau levels yields a kinematical condition above which the contribution has an imaginary part. This indicates decay of a sufficiently energetic photon into a fermion–antifermion pair with corresponding Landau level indices. Since we do not resort to any approximation, our result is applicable to the calculation of refractive indices in the whole kinematical region of a photon momentum and in any magnitude of the external magnetic field.     

Die Füllstandsmeßeinrichtung 24016

Seit nahezu 10 Jahren warden vom VEB Robotron Meβelektronik “Otto Schön” Dresden kontinuierliche Füllstandsmeβeinrichtungen hergestellt. Sie arbeiten nach dem Prinzip der Strahlenstreuung im Füllgut. Quelle und Strahlungsdetektor befinden sich — durch einen Absorber getrennt — in einer gemeinsamen Sonde. Die Sonde wird durch einen Motorantrieb dem jeweiligen Füllstand nachgeführt. Diese Messung wird bei Behälterhöhen bis maximal 40 m eingesetzt. In den Behälter ist der Einbau eines Schutzrohres für die Sonde erforderlich. Da strahlungsquelle und Detektor in einer gemeinsamen Sonde untergebracht sind, wird keine groβe Quellenaktivität benötigt. Die beschriebene neue Entwicklung ersetzt ab 2. Halbjahr 1982 den mit einigen Nachteilen behafteten Vorläufer dieser Füllstandsmeβanlage. Durch die vorgenommenen Verbesserungen warden der Inbetriebnahme- und der Wartungsaufwand verringert und die Zuverlässigkeit erhöbt.